Biqu microprobe Eva3 Fan Shroud Mount.

The main issue i had with the model available is that it was on the side and always moved so i had to readjust offset. 

Warning! Do not recommend this with an enclosed printer or high temperatures, The Biqu microprobe seems to be very bad at high temps, The magnet it uses is no longer powerful enough to move the pin back up. I consider my probe dead. 

y_offset: -24

I printed it from PetG with transparent layers and added some leds.

ABS should be more appropriate. You can use a zip tie to keep the cable in it's place. It does not hit the 40X40 fan. 

Warning, It does not work with PRIME_BLOB, the probe hits the plastic, i changed it to Prime_line.