Remington Clipper Guard

I was given a Remington beard trimmer kit, but my beard hair is way thicker than the hair on my scalp, so it works fine.

Gave my son a haircut after my wife cut mine and it came out too short. The kit only came with up to a #8, which to my understanding is equivalent to a 1". I figured I could just order a size #12 and be about perfect.

I was wrong, Wahl makes #12 guards, and there are aftermarkets up to #16, but I couldn't find anything over a #8 for Remington.

----------

I finally have revisited this model to fix my early blunders in step files and make it easier to adjust. 

So now we should have what's at least close to a #12, #16, and for whatever reason someone asked for a #24.

Print Settings

Rafts:

Yes

Supports: 

Yes

Resolution:

.2 or lower

Infill: 

30% w/ 3 shells

Filament:
PLA, but would suggest ABS if available for heat resistance

Notes: 

You want the part that contacts the head to be as smooth as possible.

So I oriented mine with the rounded parts facing up. Then moved the model up 5mm so it would generate 1 continuous support structure, and that made it pretty easy to remove. I have my printer dialed in well enough that a .2 Z distance comes off with little to no problems.