Durable Bottle Opener with Magnets

Hello.

I give you the last bottle opener you will need.

This design incorporates an internal cavity that you can place five 10x2mm round magnets in, or a 10x10 round magnet. I have provided a print file that has the print pause already set so you can just print, wait for the pause, drop the magnets in and then press resume to finish the print, and seal the magnets in permanently.

You can also print without the use of the magnets. Print file provided.

To complete the print, you will need to install, in the hole provided, a 3mm bolt/screw that is between 10mm and 30mm long and should be a button head preferably.

This opener is designed to be durable and operated with one or two fingers.

The magnets are designed to stop any bottle caps from dropping to the ground after opening, the caps will just simple attract themselves to the bottle opener for easy disposal.

The magnetic aspect of this design also allows for the bottle opener to be placed and stored on a fridge or steel BBQ, or any surface that is convenient and ferrous (made from iron).

The design also can be placed on a keychain or lanyard for ease of portability.

You will like this print; I know my friends and family do whenever they come over.

Enjoy