Interchangeable cabinet knob with removable base

My first design and print, I’m new to the 3D printing scene.  I made this handle because I can't drill into my rental home cabinet doors.  I used a removable 5lb Command clear strip to stick the base to the cabinet.  There's a tab on the base so when it comes time to remove it, just lift it up, and pull down on the adhesive's tab.  

The base with the paw knob prints under an hour with PrusaSlicer using Creality cr6-se setting with some changes.  I made no changes to print speed nor acceleration.  I used the 5lb mounting strip because I didn't feel like anything less would suffice.