USB Caps! – Type A
These are cute little USB caps that can fit into a USB Type-A port. Use the OpenSCAD file to print your own text or merge it with another model to make them truly yours!
I tried to emboss the Undertale dog, but my printer is not perfectly calibrated. The USB will still function fine as a cap.
Originally I intended for these to take 22 gauge wire and act as a quick and dirty 5V power supply from a computer USB port. It will work, but the holes on the bottom will not print properly if your printer tends to over extrude and you'll likely need to drill a hole somehow to feed the wire through and glue them in place.
⚠ If you do the above, make sure that the wire only contacts the pins and not the outside enclosure, as they are usually metal and will short
The author hasn't provided the model origin yet.