Can you post the Gcode in plain text?
It would be much easier to copy paste it
CR-10 SE Nozzle Wiper
It is still in need of a lil tweaking, but I think by putting it on here it might get more attention.
19
64
1
781
updated June 16, 2024
Makes
Comments
Can I get some help on how to make gcode?
Could you show the gcode please?
@HryhoriiMedv_1935532 I added a photo of the gcode im running on Creality Print. i suggest starting at maybe 210mm and working over as you need to make contact mine is at the limiter so just be warned.
@Kadirb_1866391 what screw size did you use?
Any chance to share the gcode?
@Kadirb_1866391 I added a photo of the gcode im running on Creality Print. i suggest starting at maybe 210mm and working over as you need to make contact mine is at the limiter so just be warned.
@Kadirb_1866391
;WIPE_SCRIPT_BEGIN
G1 F2700 E1793.4965
G1 F600 Z28
G0 F13500 X220 Y110.76 Z28
G0 X240 Y110.76
G0 X220 Y110.76
G0 X240 Y110.76
G0 X220 Y110.76
G0 X240 Y110.76
G0 X112.549 Y110.76 Z27.9
G1 F600 Z27
G1 F2700 E1798.4965
;WIPE_SCRIPT_END