Vidroc 808 BT-50 & 60 Nose Cone

Vidroc 808 BT-50 and BT-60 Nose Cone

This design makes it fairly simple to add an 808 Camera to your BT-50 or BT-60 based rocket.

• The BT-50 version It takes advantage of the narrow body of the 808 and records the flight 'sideways'. The single hole version is for cameras that can record on power-up. The long hole version is for cameras that require two different buttons to be pushed to start recording. I've tested this with a number of different 808 cameras and the fit is good, but I primarily designed it for the MateCam 808.

  Features

• 2mm hole in the tip for hanging the camera looking down during recovery.

• Slot in the nose cone shoulder so you can run the nose tip shroud line into the airframe When I print it, I put supports across the upper openings but you may be able to print it without doing that.

  For the BT-60 you need to add supports for the camera mount base and will need a RC servo mounting screw to retain the camera in the mount.