Vidroc SQ13 camera mounts

Vidroc SQ-13 camera mounts

The SQ-13 is a cute little camera. that I whipped up some mounts for in Fusion 360.

If you want to tweak the design here are links to the 360 files.

• BT-50
• BT-60

• 54mm Notes:

• All the nose cone caps will need to be fastened either with small screws or CA glue.

• Each nose cap has a hole at the tip for attaching a parachute line.
• There is a notch in the shoulder so the parachute line doesn't bind with the airframe.
• The camera does snap into place but you should consider using a small screw to lock the camera onto the nosecone.
• There is a lot of room inside these for possible avionics.