Carpuride W702 Navi-Adapter for Ducati Multistrada (RAM-Mount)

A navigation mount for a Garmin Zumo 395 was installed on my Ducati Multistrada when I bought it. I wanted to upgrade to the CarPlay solution from Carpuride with W702 and needed an adapter for the 7 inch display.
The adapter is designed so that the display is mounted as high as possible so that the display of the Multistrada in the lowest setting obscures the windshield as little as possible.

I actually wanted an adapter that screwed directly to the back of the W702 display. But the existing connection plate with the RAM mount is also a heat conductor for the internal CPU. For this reason I developed the adapter for the RAM ball.

I printed the adapter with Bambu PAHT-CF Filament. But ASA and PETG should also work well.

Print settings:

• 5 walls
• 40% infill
• 2mm bottom and top thickness
• Support: yes for v2

Required parts:

• 4x 20mm M6 Allen screws
• 4x M6 nuts

The cover is for the rear inserts of the nuts and must be printed twice (v1).

Version 2

If created a second Version (v2), where the Display is much higher. In the lowest position of the windshield, you can now see the whole display of the bike (For me. I'm 1,82 tall).
In v2 support is needed! In this version I hide the slots for the nuts. So there is no cover needed.

Note: My mount has a width of 48mm.

You can modify the adapter by your self in OnShape.