Da ich zu 90% mit geschlossenem Gehäuse drucke, wollte ich es noch etwas Luftdichter haben + mehr Raum nach oben generieren.
Komplett Modell, sowie 4 Teile Version mit Schwalbenschwanzverbindungen zum Download.
Weiterhin jeweils als recht fest sitzende, sowie leicht lose Variante.
(Ich nutze selbst die Feste)
Um die Mittleren Auflagen fest montieren zu können, müssen weitere M3 Gewinde in das Gehäuse geschnitten werden. Dies nur auf eigene Gefahr, wer sich unsicher ist, entweder Locker lassen (was auch einigermaßen gut hält) oder kleben. (Siehe Variante ohne mittlere Schraubenlöcher)
Wer schraubt unbedingt auf die länge der Schrauben achten, da diese sonst gegen den Y Schlitten stoßen!
Wichtige Infos zum Druck:
Material: ABS (damit sich bei hohen Druck-Temperaturen nichts verformt)
Stützen: Normal, Baum wäre sicher auch möglich.
Naht: auf die innen Seite fest legen, jedenfalls darf sie nicht an den Verbindungsnuten liegen.
An die Schrumpung / Verzug denken.
(Am besten erst die 4 Ecken Drucken, hinterher ggf. Mittelstege entsprechend Skalieren.)
Ich stelle neben der Original Datei, auch die Skalierung zum Download, welche bei mir am besten gepasst hat (scaled+1,5mm).
Filament Creality CR-ABS, Düse 240°C, Bett 100°C, Außenwand 120mm/s innenwand 150 mm/s, Füllung 300 mm/s, Wandlinien 5)
[ Gerne bei Fragen, Interesse oder kleinen Änderungswünschen kontaktieren ebenfalls wenn ihr mich Unterstützen wollt :D https://www.paypal.com/paypalme/clwmarcy ]
Since I print 90% with a closed housing, I wanted it to be a bit more airtight + generate more space at the top.
Complete model, as well as 4-part version with dovetail joints for download.
Also available as a fairly tight and slightly loose version.
(I use the tight one myself)
In order to be able to mount the middle supports, additional M3 threads must be cut into the housing. This is only at your own risk, if you are unsure, either leave them loose (which also holds reasonably well) or glue them. (See version without middle screw holes)
If you screw, make sure you pay attention to the length of the screws, otherwise they will hit the Y carriage!
Important information about printing:
Material: ABS (so that nothing deforms at high printing temperatures)
Supports: Normal, tree would certainly also be possible.
Seam: fixed position on the inside, in any case it must not lie on the connecting grooves.
Think about shrinkage / warping.
(may print the 4 corners first and then scale the middle bars accordingly if necessary.)
In addition to the original files, I am also providing the scaling for download that worked best for me. (Filament Creality CR-ABS, nozzle 240°C, bed 100°C, outer wall 120mm/s, inner wall 150 mm/s, filling 300 mm/s, wall lines 5)
[ Please feel free to contact me if you have any questions, interest or small change requests, also if you want to support me :D https://www.paypal.com/paypalme/clwmarcy ]
I want to thank HENLOR Henlor | Printables.com , his K1 CAD files are very handy when it comes to modeling. it saves up a lot of messuring time.
Check out his other stuff
The author marked this model as their own original creation.