Nuki Keypad 2.0 wall mount / theft protection

All models don't require any supports. It's best to print the holder face down, as the STLs are already oriented that way.

The Cover has two variants one with modelled threads and one with space for heat set inserts.

The Holder has 3 variants, one exposing only the fingerprint sensor, one only the back button and on exposing every button.

To mount:

1. Insert the Keypad into the holder
2. Remove the original backplate 
3. Mount the holder to a wall
4. optional Insert heat set insert into the cover (if you choose the heat set model)
5. Slide cover over the mouted holder
6. Tighten down with 2 m4 screws