Simple 608 Bearing alternative for light tasks

Heyho

Here I have a simple and oldshool 608 bearing alternative 4 you :)

2 Design options: Smooth & Toothed.
2 Tolerance options: 0,2 mm and 0,15 mm.

Printing “advice”

• Set Seam to “random”.
• If you can print multimaterial (Prusa XL, ..) you can use 2 different materials to decrease the friction between the inner and outer ring.
• As always: Make sure your printer is calibrated as good as possible!

For best performance I recommend to usa a tiny drop of oil/  other lubricant!

Scaling: 

You can scale the parts as you like! But always make sure to scale the x and y axis in the same percentage!

Have fun!