Henson AL13 Razor Travel Case v1.00

This is a travel case for the Henson AL13 razor. The diameter of the bayonet container is designed to fit the head of the razor. A spacer that fits the razor handle is needed for the container base.

This case allows storage of the razor without needing to remove the blade but it does not have space for storing additional blades.

The SCAD files can be modified with the opensource CAD program OpenSCAD.

https://openscad.org/

The Build Plate Library for Customizer is required:

https://www.thingiverse.com/thing:44094

Follow the installation instructions on the Build Plate Library for Customizer page.

You will need to adjust the _partGap setting in the base and lid SCAD files for your printer to get a firm closure of the case. The _partGap setting should be the same value in both base and lid SCAD files.

You will need to adjust the outsideDiameter setting in the center spacer SCAD file so that the spacer can be easily inserted into the base with little free play.

Printed on a Bambu Lab X1 Carbon

Hardened Steel 0.4 mm Nozzle

Textured PEI Plate

Sliced with Bambu Studio

0.2 mm layer height Standard @BBL X1C

No Glue

No Supports

Bambu Lab PLA Basic 1.75 mm

Filament Code: 10601

Filament SKU: A00-B9-1.75-1000-SPL

Filament Color: Blue

Filament Color Hex Code: #0A2989

Modified the following settings in the original SCAD file for the base and lid:
 

_insideDiameter

_interiorHeight 

_style

_numberOfSides

_minimumWallThickness 

_topBottomThickness

_lipHeight

_bayonetDepth

_partGap

_resolution

Wrote an additional SCAD file to create the center spacer.