Sena 50R mount for Shoei Neotec 3 / GT-Air 3

Sena 50R mount for Shoei helmets compatible with SRL-3

Recommended settings: 4+ walls, infill - yes ;) , layer 0.2mm

Recommended material: PC, PC+CF. Note - PETG is too flexible. Shoei mount does not provide very good lock as previous one, and stiff plastic should be used. PC seems to be OK, ABS/ASA might work (not tested)

EDIT: Added file with rotation to make locking tab stronger at cost of using brim and supports. This way weaker materials than PC might also work.

If You find that item useful, please give it a like. Thanks.


STATEMENT: Hereby, additionally to the terms and conditions mentioned in Standard Digital File License, I allow to use STL files for the purpose of getting item 3D printed by 3D printing service of choice as long as mentioned files are not reused by 3D printing service entity in any way.