Non-commercial
-------------------------
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 170x170mm in size
PLA Overture Black Transmission Distance: 0.7
PLA Overture Matte Blue Transmission Distance: 0.5
PLA Overture Matte Red Transmission Distance: 2.5
PLA PolyTerra Sunrise Orange Transmission Distance: 2
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
PLA Overture White Transmission Distance: 3.7
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #14 (0.68mm) swap to Blue
At layer #17 (0.8mm) swap to Red
At layer #24 (1.08mm) swap to Sunrise Orange
At layer #39 (1.68mm) swap to Savannah Yellow
At layer #43 (1.84mm) swap to White for the rest.
The author marked this model as their own original creation.