TWRP Digital Nightmare - HueForge

Non-commercial
-------------------------
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 170x170mm in size

Filaments Used:
PLA Overture Black Transmission Distance: 0.7
PLA Overture Matte Blue Transmission Distance: 0.5
PLA Overture White Transmission Distance: 3.7
PLA Overture Matte Red Transmission Distance: 2.5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #12 (0.6mm) swap to Blue
At layer #14 (0.68mm) swap to White
At layer #28 (1.24mm) swap to Black
At layer #35 (1.52mm) swap to Red
At layer #40 (1.72mm) swap to White for the rest.