Universal Mounting Bracket

Materials for Assembly

• Two Universal Mounting Brackets (same design for both)
• Two medium sized Command Strips / adhesive strips (2" x .75" / 50mm x 19mm)

Assembly Instructions

1. 3D print two Universal Mounting Brackets
2. Interlock one onto the other
3. Attach adhesive strips to both smooth exterior sides
4. Clean and dry the surface of the object you wish to mount
5. Attach the assembled mounting bracket to the object you wish to mount
   Make sure to add as many mounting brackets as you need to support its weight!
6.  Clean and dry the surface onto which you will mount the object
   Make sure the bar that faces the mounting surface is on the bottom, so the object does not slide off when you mount it!
7. Attach the object to the surface of your choosing (one that is easily adhered to