Worx Landroid M Garage Mk2

Handy UV and elements cover for your landroid mowing robot. May be easily adapted to different mowers.

This is update Mk2. I made it 2cm higher after observing a couple of collisions.  

Option with ridiculous Cyberpunk vibe provided as well.

To assemble you will need following parts:

• 2 x M4 30mm bolt
• 2 x M4 nuts
• 4mm policarbonate panel 45.5cm x 46cm
• 2 x policarbonate rim 

I used two M4 nylock nuts, but basic nuts should work as well. Both arms are fixed to the original frame and secured to the ground with a plastic through - bolt that comes with the mower.

Arms are split to make it possible to print on Prusa bed. Sections form a secure jigsaw snap-fit connection.

Polycarbonate panels with rims can be purchased at the hardware store. Here is an example: https://www.castorama.pl/plyta-poliweglan-komorowy-palram-brazowa-0-98-x-2-m-4-mm-1-96-m2/5908227329179_CAPL.prd