Portal

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA Overture Space Gray Transmission Distance: 2.1
PETG JAYO Black Transmission Distance: 0.3
PLA+ Esun Bone White Transmission Distance: 5
PLA Default White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Space Gray
At layer #16 (1.36mm) swap to Black
At layer #21 (1.76mm) swap to Bone White
At layer #24 (2mm) swap to White for the rest.