There are 3 files with 3 types of tests to be made.
First is the Flow which is being tested between 10% and 30 %.
Second is the Line Spacing Test between 0,1mm and 0,22mm.
Last test is including Speed flow change between 30mm/s and 100mm/s.
Simply take the stl, upload to slicer, split into parts and adjust ironing settings or use .3mf files.
Hope it will help!
If you would like to support me - you can buy me a coffee :)
Also if you liked the model - share photo of your print <3
Check out my other models HERE
Any feedback will be highly appreciated!
Have a great day!
The author marked this model as their own original creation.