Lamp #46

Lamp with space for slide in plates.

There is room between the frame and the shade to slide inserts in, which can create desired effects. 

You can use the slide-ins provided or create your own. Just use the provided ones as guides for size and thicknesses.

Shade measures 140 mm height x 105 Width

Lamp assembled:

180 mm height by 140 mm width

Print B140Frame and melt 4 x M3 Inserts into it.

Print the Shade and the base and any inserts you desire.

Slide the shade into the frame along with the inserts, if any, and then attach the base to the frame using 4 - M3 by 20 mm screws.

No supports required.

The fassung-lamp socket ( e14-28 mm):
     https://www.amazon.de/dp/B097K4YNL9

The electrical cable and switch:
     https://www.amazon.de/dp/B002DAOX58

The E14 Bulb used here:

       https://www.amazon.de/dp/B0B5MPL9MX

4 x M3 by 20 Screws

    https://de.aliexpress.com/item/32443118299.html?

4 x M3 Inserts

    https://www.amazon.de/dp/B08BCRZZS3?

The slicer settings for the base and the frame:

.20 mm Standard

(All standard settings and speeds, Aligned seam settings)

Filament:  Eryone Matte PLA+ Black

The slicer settings for The Shade:

Filament:   Sunlu PLA+ White

                
.20 mm Standard
Infill %  - 100, Rect
Wall Loops - 6
Top Shell - 3
Bottom Shell - 6
 

Seam Position- Aligned