Brompton Phone Mount (EasyTi & Peak Design)

Inspired by this 15º stem mount, but the EasyTi parts are just built different. Modeled from scratch. For the weight weenies: it weighs about 10 grams with 100% infill. 

Please note this is designed for the EasyTi (a chitanium brompton clone) stem, which is not the exact same specs as the original Brompton components. A maker noted that they were able to sand and finagle this design to work with the original brompton stem/bolt. 

Print Settings

• PA-CF
• Infill 100%
• Supports Enabled (tree on all overhangs, build plate only)

Installation

• 6-8 Nm, but don't quote me on that