Business card holder

Business card holder is a modification of my original Desktop Nameplate
https://www.thingiverse.com/thing:162367
and Desktop Nameplate for single or dual extrusion
https://www.thingiverse.com/thing:256837

Features
1) The business card holder is an optional addition to the desktop namplate.

2) Choice of Google fonts: Anton, Archivo Black, Baloo, BreeSerif-Regular, Courgette, FrancoisOne-Regular, Montserrat, and Roboto-Black

3) The nameplate volume is slightly increased (affecting printed height).

4) The nameplate volume is designed to act as a weighted base. I have been successful using aquarium gravel. It is clean and can be easily handled using a paper tube cut on an angle (see photo).

5) Can print as a single unit or multiple pieces for dual extrusion.

Print instructions

No rafts / No supports
Resolution: 0.3 mm
Infill: 5%

Notes:

There is a need to weigh down the base to balance the weight of the business cards due to the geometry.

Set your slicer to 0.3 mm per layer, 4 bottom layers / 4 top layers and 5% infill in a grid pattern. Pause the print at 16.4 mm. Fill it with the aquarium gravel.

I have been successful using aquarium gravel. It is clean and can be easily handled using a paper tube cut on an angle (see photo).

Change the filament at 18.2 mm for the lettering.