Heavy duty adjustable furniture leg

Big and strong furniture leg. Its height can be adjusted after installation, from minimum 70mm to almost the double. Needs 4 M6 or M8 screws to be mounted.

Print Settings

Printer Brand:

Wanhao

Printer:

Rafts:

No

Supports:

Resolution:

0.2

Infill:

Filament: Sunlu PLA +

Black

Notes:

I designed it taking into account the tolerance needed to make the two parts fit without too much post-printing work. rnPlease make sure you clean thoroughly the threads before trying to screw the two parts together. Some repeated screw-unscrew movements will be needed before arriving to the lowest-extension-configuration. rnLubricant can speed-up the process of screwing the parts together for the first time.