Good Vs Evil

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA Overture Cement Gray Transmission Distance: 0.6
PLA Overture Space Gray Transmission Distance: 2.1
PLA Overture Light Gray Transmission Distance: 0.7
PLA Overture White Transmission Distance: 4.4
This print uses 6 unique filaments

Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Charcoal Black
At layer #8 (0.72mm) swap to Cement Gray
At layer #12 (1.04mm) swap to Space Gray
At layer #16 (1.36mm) swap to Light Gray
At layer #21 (1.76mm) swap to White for the rest.