MicroSD Pokedex

This is my second Print. I haven't tried printing it yet for various personal reasons. However, I think the piece turned out well enough to be used. I will update.

Modified the hinge system. Making it simpler, since the old version did not work correctly. I have added the details on the "cover" and modified the SD slots. I think that this way they will have better resistance and will endure more of the effort they endure.

On the other hand, this part is designed to be printed on an Ender 3 V2 NEO with a 0.2 mm noozle. Similarly, the material will be PLA (sunsu) at 200º C and 60º C in the bed.

IMPORTANT: I haven't printed the piece yet, so I don't know how it turned out in the end.

Update (07/11/2024): I made some small changes to the product.

After a lot of headache and fighting with this, I think I have achieved something quite functional. The lid already opens and closes as it should and has a solid latch that can withstand use. In addition, I have adjusted the size of the SD slots to the maximum (but each SD is a world, some fall out). I leave all the files in case you want to modify them and above all, I hope you enjoy it. 

I don't think I'll make any more changes.