UBBI mount for Elegoo neptune filament runout sensor
Description
PDFUBBI mount adapter for Elegoo stock filament runout
🤩 Do you like the design? You can help fund innovations like this!
Consider supporting me!
Much appreciation given to my supporters, and you get exclusive access to various CAD files!
Submit feature requests here!
Features:
- Mounted with friction, seated in place with the slits and screw head holes, will stay firm
- Allows quick connection to bowden setup
- Prints with minimal support
- Twist locking mechanism with audible snap
NOTE:
The first 3-4 snaps must be done with a wrench, to break in the mechanism before it gets soft enough to be used by hands!
Recommended print settings:
- Nozzle diameter: 0.4mm
- Layer height: ≤ 0.2mm
- Reverse on odd: disabled
- Precise walls: enabled
- Wall order: i/o/i
- Tolerance requirement: 0.1mm
- Print orientation: as imported
- Supports: included with the model, enable support generation and change to manual placement, don't add anything
Recommended materials:
- PETG
- ABS/ASA
Changelog:
| Official release | Changes |
|---|---|
| v1 | First official release |
| v3 | Updated to UBBI v72 |
| v4 | Added ribs at screw mounting hole for strength |
| v4.5 | Added model for runout sensor that have 5.5mm poles (usually they are 4.45mm! Measure before print!) |
| v5 | Implemented anti sag to pole slit, re-aligned screw hole. |
| v7 | Updated to UBBI v82 |
| v9 | Adjusted pole location for 4.5mm pole version, added video installation guide |
v10 19th July 2024 | Updated to UBBI v87 |
v12 3rd August 2024 | Updated to UBBI v90 |
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
Adapter to fit on stock elegoo neptune filament runout sensor
