Heltec V3 LoRa Meshtastic Case 3 Piece M3 by Kyle Ireland / HELTEC LoRa 32

Recently discovered Meshtastic.
My first Device was the Heltec LoRa v3 with SMA antenna piece.

I decided to make a case that still has access to the battery port and socketed pin area.

This design could be improved on.

Screws
The case is held together with two M3 screws that self thread.
M3 6mm to 8mm or Longer (Max of 13.5mm or so until it pops out the bottom.)
 

Printing
I printed using 0.2mm layer height and used some PLA+
If you try this with PETG let me know how the fitment is!
 

Other
I will update/add to this if I make some mounts and include the files.
Feel free to modify and post your remixes/creations!