Bed clamp for momcozy Babyphone Camera

A clamp that fit the included Camera Holder from momcozy
6
35
0
205
updated May 26, 2024

Description

PDF

Easy to print, no supports, all bolts printable

Idea

Newly made dad who didn't feel like spending money again for a simple holder and also didn't wanted to drill holes in the wall 

The parts

  • The clamp base
  • 1x big 20mm bolt, easy turn-able with your hand
  • 2x 5mm bolt with a 4mm hex/ Allen head (copy them in you slicer, or add the stl 2 times)

How to assemble?

  • Verify if the bolt holes don't have small filament pieces (see pictures), if so, remove them with a cutting tool
  • Attach the included holder of you momcozy Camera to the base clamp with the 2 printed 5mm bolts. Use an 4mm Allen Key. Carefully, no need over over tighten.

What do you need?

  • All parts a printable on one plate
  • You can replace the printed 5 mm bolts with your own if you have one. It's isometric.

Printing instructions

I printed all on an Creality K1

Filament i used is Creality PLA+ White (i print it @220° C because of better adhesion at the first layer) 

Certainly you can use your own filament with your settings. The table below are my setting which give me good results for the bolts.

PartsQualitySupportInfillBrimWallsTop-/Bottom Layer
Full Kit0.16mmNo20% GyroidNo34-6

Tags



Model origin

The author marked this model as their own original creation.

License