Made for a foot/stand with a max diameter of 54mm, and a parasol with either 32mm or 38mm stick.
In the 3mf-file both models can be found, in Pursa Slicer you get a question about multi-file, so I suggest answer no, and remove the one you don't want to print.
Also, the is room for a 16x3mm craftstick, the idea is to take the load from the tightening screws in the stand. Can be seen in the picture.
I printed 2 for 1 stand (2 tightening screws in my stands).
In my case, with a 0,6mm nozzle, 2 walls, 3 top/bottom-layers and 10% 3d-honeycomb-infill.
Sorry, no printfiles, I suspect people who installed a 0.6mm nozzle don't need one, and for the ones who don't know how to create your own, well sorry. But, I thought it would be better not to upload a file that I haven't tried. But, of course, if requested, sure.
The author marked this model as their own original creation.