EZCircle - Easy Way to Draw Circles

This is a part I made to make it easy to draw circles mainly during math lessons and tests.
53
118
1
786
updated May 26, 2024

Description

PDF

This is a part I made to make it easy to draw circles mainly during math lessons and tests.

The device is assembled with three or four parts:

  1. The main body.
  2. The base (the thing that touches the paper).
  3. A bearing (10x14x4 mm).
  4. A piece of filament (optional).

** The parts were designed to be printed in their current orientation without support 

 

What are the features?

  1. 3-12 mm in diameter circles.
  2. Easy way to see where is the middle of the circle precisely.
  3. Roughly estimate the number of degrees you rotated by using the slots on top of the Main body.
  4. Slim design.
  5. Optional accent color.
  6. Can be fun to play with.
  7. Support is not needed.

 

How to assemble?

To assemble you will need to print one Main body and one or two Bases,  it will probably be hard to insert the bearing into the Main body so one sacrificial might help with the task. 
Take the Main body and place the bearing inside of it it's critical that the bearing will enter with the direction of the hole and not be crooked, take the Base and push it inside the bearing which already should be inside the Main body. Now this part is optional,  you can take 1.75 mm filament and place it in the little hole found on top of the Main body, this is a simple way to add an accent color to the print without having a multi-material printer.

 

If you want one and cannot print it or if you just want to help me out, you can go to Etsy or eBay and buy it from me.

Have funnnn! 😁

 

 

 

Tags



Model origin

The author marked this model as their own original creation.

License