Hot Wheels logo

The STL file can be divided into parts for easier coloring. AMS recommended.

Printing on textured plate:

• Use slightly higher nozzle and bed temperature for the first layer when printing to have fewer gaps between colors
• Print slower for better quality, set initial layer and initial layer infill to 50 mm/s, outer wall, inner wall and top surface to 100 mm/s

Printing on smooth plate:

• Set initial layer height at 0.1 mm and initial layer width 0.3 mm
• Use slightly higher nozzle and bed temperature for the first layer when printing to have fewer gaps between colors
• Print slower for better quality, set initial layer and initial layer infill to 20 mm/s, outer wall, inner wall and top surface to 100 mm/s

Adding holes for magnets

• You can easily add holes for magnets in the slicer
• Right-click on the objects and select Add negative part - cylinder
• Scale the cylinder to the size of your magnets, make it slightly bigger so the magnet can fit in
• Place the holes (negative parts) where you want to position the magnets
• Slice and print

Commercial Use

This model is only available for non-commercial use, you can print it for yourself or as a gift for others, but you may not sell or alter the model. If you are interested in obtaining a commercial license please visit my Patreon store: https://patreon.com/noordinaryleaf