4 Piece Frame for Prusa PEI Sheet

A 4 Piece frame with holes for magnets to hold and display the Prusa MK 4 1 Year Anniversary PEI Sheet.
6
13
1
111
updated May 26, 2024

Description

PDF

Once I received my MK 4 kit with the 1 year Anniversary Sheet, I decided to print a frame for the sheet to hold the sheet instead of printing on it. I printed the pieces on my MK 4 with a 0.4 nozzle at 0.1mm layer height, and to fit the frame on the print bed it has to be rotated ~40-45 degrees. I printed the frame with Prusament rPLA Wine Pigment, and it almost looks like its made of wood! 

The letters are optional, but I printed those on my MK3S+ with a 0.25 nozzle at 0.1mm layer height and was able to press them into the bottom sheet frame piece. To print the frame, you'll need: 

  • 1x Prusa Sheet Frame Bottom Pieces
  • 2x Prusa Sheet Frame Side Pieces
  • 1x Prusa Sheet Frame Top Piece
  • 1x Prusa Sheet Frame Letters (Optional)
  • 8x 3/8" Diameter x 1/8" H Round Magnets (I got mine from Home Depot)

The hardest part is making sure the magnets are oriented correctly so the pieces will hold together, so make sure to be extra careful when inserting the magnets!

Model origin

The author marked this model as their own original creation.

License