Planter with a twisted rib design, rectangular and circular plates.
Drainage as well as non-drainage designs are provided.
The planter has been tested with water over a 24 hr. period and did not leak.
The planters are 90 mm height x 110 Width.
No supports required.
The slicer settings for the pots and circular base:
.20 mm Strength
Filament: Eryone Grey PETG
Infill % - 45 , Rect
Wall Loops - 8
Top Shell - 8
Bottom Shell - 8
Seam: Random
Also made a PLA variation using Sunlu PLA+ Marble, picture provided.
Model was tested with water and did not leak over 24, but it is PLA+, so eventually will swell and probably leak.
The author marked this model as their own original creation.