This is a camera mount for the Logitech C920 series, compatible with the Prusa MK4. If you wish to create your own camera mount for a different camera, here is a link to the Prusa MK4 X-Axis Motor Cover to start with a blank slate. Shoutout to @hallonhatt_171283 for the mount they made for the I3, which inspired me to make this one.
Disassembly of the camera is required. An easy guide can be found on YouTube by @Jared Poole.
I recommend using Prusa settings; however, I've made mine out of PCCF, and it works fine. I also tested it using PLA.
Requires one M3 x 18mm screw.
The author marked this model as their own original creation.