easy printable organizer. You attach it with double-sided tape, glue or screw. Insert the cable and secure the fuse. The cable can easily be added or removed at any time.
I printed without supports on the MK3+ and allways print from PLA.
The number in the file name is the number of cables
example: file cable organizer 4c - for 4 cable
One cable slot is optimalized for standard 230V cable with 3 wire, UTP (network cable) or several smaller cable (USB, audio…)
Update:
all models in the NEWs folders are with a clip
I created new type cable organizer. The new type have clip on fuse. Is more secure fuse but if you dont have vibration I think old still very good fuse. I have 50x old fuse and all is fine.
On new fuse is small clip. If you want take out you must pres clip
If you print only 1 cable organizer and use double-sided tape i recommended print with bigger base. I think 1C cable organizer dont have sufficient contact with the pad. is too small
NEW type SCREW
You can use SCREW. I use 3,5x16. the screw head is countersunk. Cable have same space.
NEW type DOUBLE-SIDED
This models is good for someone who want organized cable but dont want fix organizer to attach an organizer to something.
The author marked this model as their own original creation.
