Apple Homepod Mini Headboard Mount

Homepod Mini holder and headboard hanger mount to secure homepod mini to a headboard without needing any screws into the wall or headboard itself. A cable chase is integrated into the mount to hide the cable up and over the headboard so it is not visible.

Homepod mini holder model is from SpiceWeasel so this is remixed from his original design. I designed the hanger mount to utilize the screw holes in his model. Use two M3x12 flat head screws and two M3 nuts to secure the two parts. 

Drawn in F3D, fully parametric. There are user parameters for the thickness of the headboard, how far from the top of the headboard to the centerline of the screwholes in the homepod mini mount, and cord thickness.

The STL of the headboard hanger is sized for a 41mm thick headboard and brings the top of the homepod mini roughly level with the top of the headboard. Use the F3D file to adjust for your specifications.

Printed on QIDI X-Plus3 in ELEGOO PETG. 

0.20mm layer heights, 15% infill, no supports (print the hanger upside down to avoid overhangs)

Designed a headboard hanger mount which mates with the original holder/wall mount.