Suzuki Samurai Gauge Hole Radio Bezel

An adapter to mount a 3 1/8" gauge hole radio into the clock location on a Suzuki Samurai/Jimny/Sierra
1
11
0
392
updated May 25, 2024

Description

PDF

This is a bezel to mount a gauge hole radio into the factory clock location in a Suzuki Samurai, Jimny, Sierra and a Maruti Gypsy. This is only compatible with the round vent dashboards. In the US, the model years for the dashboard are 1986-1988.5, the later dashboards will be a different design. 

Most gauge hole radios will mount in a 3 1/8" hole, however measure your radio and if you can cut a smaller hole in the dash, its highly recommended that you do. 

When the hole is cut, it needs to be concentric with the original indent in the dash, otherwise the hole in the bezel will not line up. Cutting out one of the vents will also work if you choose. if you have a hole in the dash already, you can design a slug that will fit in your hole saw and the existing hole as a guide. 

Its STRONGLY recommended that you print the bezel from a high temp plastic like ASA, PC, Nylon, ABS, etc. 

PLA WILL SOFTEN IN THE HEAT

PETG might work in cooler climates, though use at your own risk. 

Tags



Model origin

The author marked this model as their own original creation.

License


Highlighted models from creator

View more