Adapter mount to install RAK Wireless 19003 mini baseboard to enclosure with 5mm grid hole pattern. Also includes adapter for 2000mah flat pack battery and Waveshare solar controller (D version). The onboard solar charging on the RAK boards is functional, but the Waveshare solar controller uses better MPPT, shows battery status at a glance, and overall a nice controller for various random projects. Screws should self tap into PLA (make a rough guess on size but worked for me), and uses M3 round head screws to mount to the enclosure grid so there's correct clearance under the PCBs.
These were specifically designed to fit the 5.9" x 3.9" x 2.8" enclosure found many places. The links and stock levels change a lot, so that's the one you search for. Will also fit other sizes if they have the 5mm grid of mounting holes.
Suggested links for other parts:
The battery can be found here: https://a.co/d/c4XmDsI
The RAK 19003 base board can be found here: https://store.rokland.com/collections/base/products/rak-wireless-wisblock-mini-base-board-rak19003-ver-b-pid-306024
RAK Core module: https://store.rokland.com/products/rak-wireless-rak4631-nordic-nrf52840-ble-core-module-for-lorawan-with-lora-sx1262
RAK environmental sensor is highly recommended to keep tabs on temp/humidity inside the enclosure: https://store.rokland.com/products/rak-wireless-rak1906-wisblock-environment-sensor-bosch-bme680
Rokland also has a nice selection of quality antennas and is a US based distributor of RAK wireless stuff. Check the Meshtastic docs for other recommended antennas.
The solar controller can be found here (not pictured, will update later): https://a.co/d/dsJMNuM
Solar panel that fits the lid of this enclosure perfectly: https://a.co/d/4s5wslO
Meshtastic project: https://meshtastic.org/
Category: ElectronicsThe author marked this model as their own original creation. Imported from Thingiverse.