Shining Rayquaza - HueForge

I used the following colors and settings:

This card has a size of 160x224,80mm. I reduced it to 60%, but without changing the Z height. This must be 100%.

Layer height is 0.08mm with a base layer of 0.16mm and 100% infill.

Filament:

• I started with Elegoo PLA Black
• At layer #11 to PolyTerra PLA Fossil Grey
• At layer #15 to PolyTerra PLA Muted Red
• At layer #16 to PolyTerra PLA Savannah Yellow
• At layer #22 to BambuLab Matte Ivory White

I recommend a slightly darker gray than the Fossil Gray, but that was the only gray I had.