The SPA Scoop

Some instructions if you like to adjust your SPA Scoop

How to adjust the grid to your requirements:

1. Select print settings in the upper meny row
2. Select infill
3. Enter Fill density (sets the size of the grid)
4. Enter Fill pattern (sets what kind of mesh you prefer, my favourite is honeycomb)
5. Slice your part and see the result before printing

If you start with the stl-file do these steps before:

1. Select the part
2. Right click and  “Spit to part”
3. Select the “gear” on the bottom part in the model tree to the right and right click
4. Select  Layers and perimeters
5. Change the bottom and top to 0
6. If you prefer printing with two different colors add “color change” at height 1,80
    

Enjoy your SPA Scoop!