Router - wall mount

This is a slip fit pair of clamps originally intended to hold a Linksys 8-port WorkGroup Hub on the wall. It grabs the housing on the outer edges allowing the network cables through.

When the holding tab screw diameter is set to 5 (default) it allows a 3/16" dia Tapcon easy access.

Print instructions

Makes a left and right clamp.
Use supports for the hole slots. Print with at least 25% fill.

Current defaults are for making a pair of clamps for a LinkSys Model EFAH08W hub, and using a 3/16" diameter Tapcon cement screws.