Pokemon Logo for Bambu dual colour

Remix for Bambu AMS (dual colour.) Cut the 'o's so that the Yellow can print atop the Blue to avoid purge waste.

My settings:

• Used the default setting on Orca for Optimal (0.16mm layer height)
• Ironing on top most surfaces for smooth finish
• Printed the stands in Bambu PETG transparent (see these settings for best results: https://wiki.bambulab.com/en/knowledge-sharing/transparent-petg). NB: also, if you want the transparency to really come through, I changed the sparse infill density to 99% (not 100% - 99% reduces the cross hatching on the surface).
• Blue: FormFutura PLA; Yellow: SA Filament PLA

Remix for Bambu AMS (dual colour.) Cut the 'o's so that the Yellow can print atop the Blue to avoid purge waste.