Demon Slayer - Giyu Tomioka - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyTerra Charcoal Black
PLA PolyLite Azure Blue
PLA PolyLite Aqua Blue
PLA PolyLite White

Swap Instructions:
Start with Charcoal Black
At layer #7 (0.64mm) swap to Azure Blue
At layer #12 (1.04mm) swap to Aqua Blue
At layer #18 (1.52mm) swap to White for the rest.