Ferris Wheel of Rings (with pins)

The same design from A2S_dESING with guidance pins

Printed in PLA on a Bambu P1S - I also changed the slightly rounded geometry of the wheels to be squarer to reduce warping.

It can be test fit, but superglue is still recommended for assembly (I have found the thicker gel brands are much easier to use with PLA)

Added small guiding pins to aid with assembly and gluing 

• The wheel components each have a pin to align and support the arms/braces
• The arms/braces have a pinhole, slightly larger than the pin to allow for some tolerance
• The frames have a line of six pins to align and connect to the side of the base, which has corresponding pinholes.