Prusa MK2s Multi Purpose Platform

This is a multi purpose platform for the Prusa i3 MK2s which makes use of the cut-out polygon ontop of the z-axis, providing you with real estate to build or attach anything you want to it. It has several pre-drilled holes for M3 screws which are self-tightening, no nut needed plus four cut-outs for cablebinders. The MPP itself fits perfectly without any screws, binders or anything and is very stable when printed with 100% infill.

There are two versions of the MPP, one for the left and one for the right side (as seen from the front), labeled as such.

I have made aTray for the MPP to hold some tools I need frequently and with a convenient space to place screws, it can be downloaded here: https://www.thingiverse.com/thing:2647994

For the other side I've made aPaper Towel Holder because as you know we should clean the bed before every print ;) You can download it here: https://www.thingiverse.com/thing:2656138

Or use it as a mount for your Rasbpi, a place for Marvin to be or any other thing you always wanted to attach to the printer :D

Print Settings

Printer Brand:

Prusa

Printer:

No

Supports:

0.15

Infill:

Notes:

Printed with PLA