Logitech C270 Camera top mount Creality K1 Max

USB camera mount for top view through K1 Max top window
10
32
0
611
updated May 23, 2024

Description

PDF

Allows positioning of a Logitech C270 external USB camera on the top window of K1 Max.

Connects around the handle of the glass plate.

Requires M3X25 bolt and nut.

Remove the original screw and nut from the hinge/bracket of the C270.

Align the holes of the print and the camera and pass through the M3 bolt and attach the nut as needed. Dont over-tighten!

Print with supports. 

The STL file has all the parts combined and is ready to print.

The 3MF project file has three separate components to allow you to adjust the height or overhang to suit your preference. Merge them back together before printing !

Depending how high/far you extend the arms, you might need to re-orientate to avoid weak joints which could snap.

Note, the view from this angle is not ideal for model timelapse as the print head sometimes obscures the model. Its more of a location for a second camera.

Hastily cobbled togther from an idea at https://www.printables.com/model/214543-voron-c270-holder and a Wyze remix by BaldPrints.

 

 

Model origin

The author marked this model as their own original creation.

License