Tree moon light Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x125mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3.1mm and the Actual Depth is 3.2mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Gray Transmission Distance: 2
PLA Elegoo Matte White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #15 (1.28mm) swap to Blue Gray
At layer #23 (1.92mm) swap to Gray
At layer #30 (2.48mm) swap to White for the rest.