Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 175x180.38mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Purple Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Note: You do not have to use Bambu Labs filament for this print.
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #13 (1.12mm) swap to Purple
At layer #18 (1.52mm) swap to Jade White for the rest.
The author marked this model as their own original creation.