Sovol SV06 Reverse Bowden Tube Mount on Extruder

Fully based on and all credit for the design belong to the original model by Leander Perez Blanco. 

I included the M6 thread in the model (to make it easier to screw the connector in without damaging the part, printed in Sovol Blue PLA). 

I also made the threaded part a little thicker and provided a small recess so the ledge that the PC4-M6 connector I have, can sink a little bit in it for extra support. When using this kind of PC4-M6 connector in the original model, it would stick out a little bit on the underside. With the minor modification, it is even/flush with the underside.

I use this mount in combination with clip-on PTFE tube twister guides, to guide the Reverse Bowden PTFE tube from my dry or storage box, through a PTFE Tube Cage straight above the extruder and into the extruder mount.

Included the M6 thread in the model, made the threaded part a little thicker and provided a small recess for the ledge of the PC4-M6 connector to sit in.